Technical Data
Section 3
3-28
Abbott VP 2000™ Processor Service Manual
30-608308//R1—September 2008
Water Bath Data
Drying Station
Table 3.6:
Drying Station
Performance Data
Table 3.7:
Performance Data
Table 3.5:
Water Bath Conditions
Description
Specification
Input Line Pressure
10 to 100 psi
Water Type
Deionized
Flow Thru Rate
Factory set via regulator
approximately 1 liter/min
Recirculation Rate
Approximately 3.5 liters/min
Water Bath Capacity
Approximately 1,750 ml
Water In Line
3/8 inch reinforced flexible tubing
to fit standard laboratory water tap.
Adapter required for other taps.
Drain Line
1/2 inch flexible tubing gravity feed.
The entire line
must be below
the
water level in the unit.
Description
Specification
Temperature
Adjustable 25
o
C to 80
o
C
Description
Specification
Slide Capacity
50
Unheated Reagent Vessels
12
Heated Reagent Vessels
3
Water Bath
1
Drying Station
1
Reagent Basin Protocol Volume to Cover Slide
600 ml
Reagent Basin Protocol Volume to Cover Sample
470 ml
Heated Reagent Temperature Adjustment
Basin 1: Ambient to 80
o
C
Basin 2: Ambient to 80
o
C
Basin 3: Ambient to 40
o
C