![background image](http://html1.mh-extra.com/html/abbott/vp-2000-processor/vp-2000-processor_service-manual_450983152.webp)
Troubleshooting
Section 6
6-10
Abbott VP 2000™ Processor Service Manual
30-608308/R1—September 2008
Symptoms and Faults
The following is a partial list of problems that may occur and
modules that could contain the cause. Modules are listed in
likelihood of being the cause of the symptom.
Table 6.1:
Symptom and Faults
Fault
Check/Replace
No power when unit is first turned ON.
• Power Switch/Breaker
• Line cord
• Power Supply Plug-in
• Fuse - 230V unit
• External power
Power stays ON with switch OFF
Power Switch/Breaker
Circuit Breaker trips
• Power Supply
• Power Switch/Breaker
• Line cord
• Line filter
Exhaust Fan operates but no other power
comes ON
Power Supply
Exhaust Fan does not operate
• Fan
• Cable to Fan
• Power Supply
No X-movement of Robotic Arm
• Check Interlock Switches
• Physical obstructions
• X-drive Belt (shipping strap)
• Tension Arm Spring
• X-motor Assembly
• Power Supply
• Computer Control Board
No rotational movement of Robotic Arm
• Robotic Arm
• Computer Control Board