SOTOX A™ MOBILE ANALY ZER | USER GUIDE
17 | EN
6. RUNNING A DRUG TEST
6.7
Printing results
If the results and questionnaire (if used) have been accepted, the SoToxa™ Mobile Analyzer will give the option to print results.
Step 1: If not already connected, attach the printer to the analyzer (refer to section 3.1 Connecting the printer) and ensure the printer is switched on.
Step 2: To print results, select Yes using the left select key.
Step 3: Failure to connect or switch on the printer will lead to the print failure screen. Check connections, switch on the printer and select Retry to
return to the previous screen. Alternatively select Cancel to skip printing.
Step 4: After printing is complete, the print option screen will be displayed again to give you the choice to print additional copies of results.
Step 5: If printing is not required, select No on the print option screen.
6.8
Data export
If the analyzer is configured to send a JSON packet to a host computer instead of printing (refer to section 8.3.9 Printer port), the SoToxa™
Mobile Analyzer will give the option to export test results instead of printing results.
Step 1: If not already connected, attach the appropriate RJ11 cable to the analyzer and to the Host PC, and ensure the host computer is ready to receive
the test results from the analyzer.
Step 2: To export data, select Yes using the left select key.
Step 3: After export is complete, the analyzer will proceed to the next screen.
Step 4: If data export is not required, select No on the data export screen.
6.9
Completing the test
At the end of testing when results have been displayed and printed (if required), the SoToxa™ Mobile Analyzer will prompt the user to remove
the SoToxa™ Test Cartridge. Do not remove the test cartridge by pulling the SoToxa™ Oral Fluid Collection Device and do not attempt to
remove the collection device from the test cartridge.
Dispose of the used test cartridge and collection device according to local and Federal regulations.
Take care when removing the test cartridge as the underside of the cartridge may be hot. Handle the test cartridge by the side edges.
Step 2
Step 2
Step 3
