Abbott MER3700, User Manual

Page: 18 / 40

14
Network Hardware Connection
You can connect the Merlin™ 2 PCS to a network using the wired ethernet network connection on
the back of the programmer.
Figure 10. Network hardware connection
Shut Down
To power down the Merlin™ 2 PCS:
1.
Remove any cables connecting the Merlin 2 PCS to the patient.
2. Move the On/Off switch to the Off position.
The Merlin 2 PCS has a power switch that, when shut off, isolates both conductors of the supply
mains simultaneously.