Abbott i-STAT Alinity, Operation Manual, Page: 232 / 296

Electronic Simulator
Testing for the external Electronic Simulator can be scheduled to be performed based on an interval of a
number of days. This setting is usually determined by compliance with regulatory agencies.
Note: Internal Electronic Simulator testing is performed every time a cartridge is tested
on the i
‑
STAT Alinity.
Simulator Testing Schedule
Run Electronic Simulator every n
days
Determines how frequently the external electronic simulator is
tested. Specify a number of days in the range 0 - 365. The default is
0, which turns off testing.
Note: Abbott Point of Care manufacturer's requirement is
for the electronic simulator to be tested every 6 months
(182 days).
When finished, choose from the options shown at the bottom of the screen:
•
Previous to go back to the previous screen
•
Discard to undo changes
•
Finish Later to create a draft
•
Next to open the next tab
192
i-STAT Alinity — System Operations Manual Art: 746300-01 Rev. N
Rev. Date: 02-Nov-2022