Abbott i-STAT Alinity Operation Manual Download

Page: 193 / 296

Communications

These settings control the communication method and action taken if upload fails or is delayed.

Result Auto

Transmit

Transmit all result or results to data manager once displayed on the instrument

and after all required entries are completed or after the inactivity time is

reached.

Power Down

Communications

Select the action to be taken for data transmission when the instrument powers

down:

None

No data will be communicated or transmitted from

instrument to data management system or

network service when the instrument powers

down.

Unsent Results

Unsent results will be transmitted to the data

management system when the instrument powers

down.

All (Unsent Results, Lists,

eVAS)

All unsent results, Operator/Patient/Cartridge

Lists, if enabled, and eVAS, if new version

available, will be communicated and transmitted

to or from the data management system and

network service when the instrument powers

down.

Wireless

Communications

Enables wireless communication for the i

‑

STAT Alinity instrument. The default

setting is enabled. Uncheck the box to disable. Wireless communication is not

fully enabled until the instrument is configured using the NCi application. See

the NCi section of this manual for additional instruction.

When finished, choose from the options shown at the bottom of the screen:

•

Previous to go back to the previous screen

•

Discard to undo changes

•

Finish Later to create a draft

•

Next to open the next tab

153

i-STAT Alinity — System Operations Manual

Art: 746300-01 Rev. N

Rev. Date: 02-Nov-2022

Summary of Contents for i-STAT Alinity









































































































































































































































































































Search results

Summary of Contents for i-STAT Alinity

Reviews:

Related manuals for i-STAT Alinity

Brands by name

Popular brands

Abbott i-STAT Alinity, Operation Manual

Search results

Summary of Contents for i-STAT Alinity

Reviews:

Related manuals for i-STAT Alinity

Brands by name

Popular brands