manualshive.com logo in svg

Abbott i-STAT Alinity, Operation Manual, Page: 161 / 296

Share
Download
Abbott i-STAT Alinity Operation Manual Download Page 161

AlinIQ NCi - Save the Network Connectivity (ancc) file

After supplying the information for connectivity, you are prompted to save the ancc file. The saved file

can then be loaded onto a USB memory stick, and then uploaded to an i

‑

STAT Alinity instrument.

At the bottom of the NCi screen, choose Save Network Connectivity (ancc) File, then click Continue.

Depending upon the browser in use the ancc file will be saved to the Downloads directory, or, at the

bottom of the screen a banner may display with the prompts shown below.

Note: Best practice is to select Save which will save the file to the Downloads directory.

Opening NC (ancc) files in a text editor is not recommended.

Do you want to open or save filename.ancc?
Open

Open the ancc file in a text editor.

Save

Save the file to the Downloads directory.

Save as

Save the file to a specified destination.

Note: If you use this option make note of the destination where the file is saved.

This information will be needed to load the ancc file onto the USB memory stick.

Save and open

Not recommended.

Cancel

Do not save the file.

123

i-STAT Alinity — System Operations Manual

Art: 747079-01 Rev. F

Rev. Date: 28-Apr-2020

Summary of Contents for i-STAT Alinity









































































































































































































































































































Reviews:

No comments