Abbott i-STAT Alinity, Operation Manual, Page: 151 / 296

AlinIQ NCi - General Section
On the first section of the NCi screen, specify whether this NC file will be used for multiple i
‑
STAT Alinity
instruments or a single instrument. Unless your facility requires that each instrument have its own
unique security credentials, a single NC file may be used for all instruments connecting to the same
network.
Numbered labels ( ) are used in this section to highlight areas of the screen. These labels are for the
purpose of this document only. They are not part of the actual NCi screen.
The configuration will be used for:
Select one of these radio buttons:
Multiple instruments
Use this NC file for multiple instruments. This is the default.
Note: This option may not be available if your facility requires individual
Enterprise Security Certificates for each instrument.
Instrument
This NC file will apply only to one instrument. If this option is selected, the instrument's serial
number is required:
SN-
Serial number of the instrument to which this NC file applies.
When a serial number is specified, the NC file name will include it, as shown here:
DefaultConfig. snnnnn .ancc
Configuration Name
113
i-STAT Alinity — System Operations Manual Art: 747079-01 Rev. F Rev. Date: 28-Apr-2020