IMPORTANT:�ontinuedJ
•
Do
not
add water or other liquid to control solution.
•
Control solution results do not reflect your blood glucose or blood ketone level.
•
Contact Customer Service for information on how to obtain control solution.
Performing a Control Solution Test
1.
Open the foil test strip packet
at the notch and
tear down to remove the test strip.
2.
Insert the test strip
until the meter turns on.
Notes:
•
Be sure to check that your meter screen is working
properly each time you turn your meter on. If you see
any white segments in the black off screen, or any
black segments in the white test screen, there may be
a problem with the meter. (See Section 5, Getting to
Know Your Meter, for more details.)
•
The meter turns off after 3 minutes of inactivity.
Remove and reinsert the unused test strip to restart
the meter.