CELL-DYN
®
3200 System Operator’s Manual
6-17
9140181H—October 2001
Section 6
Calibration Procedures
Figure 6.4 Calibration Log Screen (CS Model)
Return
The
[RETURN]
key is used to return to the main
CALIBRATION
menu.
Auto-Calibrate
The
[AUTO-CALIBRATE]
key is used to display the
AUTO CALIBRATION
screen (refer
to Figure 6.5). The
AUTO CALIBRATION
screen changes during the calibration
process as reference values are entered and as runs are completed. These changes
are discussed in
Auto-Cal Method
later in this section.
When the
[AUTO-CALIBRATE]
key is pressed, the following soft key labels are
displayed:
WHOLE BLOOD/
CALIBRATOR
(This key alternates between the selections)
PRINT
RETURN
