CELL-DYN
3000 System Operator’s Manual
10-63
9140240E — May 1995
Chapter 10
Troubleshooting
Table 10.2
General Fault Conditions (Continued)
Bad checksum in non-volatile RAM/BL
– – – – – Probable Cause – – – –
– – – – Corrective Action – – – –
1.
When the system was
1.
Call for technical assistance.
powered ON, the Analyzer
did not transmit the correct
message to the Data Station.
__________________________________________________________
Bad monitor command/BL
NOTE: This message does not pertain to the Data Station
screen (CRT).
– – – – – Probable Cause – – – –
– – – – Corrective Action – – – –
1.
During the initialization
1.
Initialize the Analyzer
process, the Data Station
by pressing the
and Analyzer did not
[INITIALIZATION] key
communicate properly.
on the second
Search
Go Back
Book TOC