background image

 
Product Manual 

Abbexa Ltd., Cambridge Science Park, Cambridge, CB4 0EY, UK 

www.abbexa.com · Email: [email protected] · Phone: +44 (0) 1223 755950 · Fax: +44 (0) 1223 755951 

Registered in England: 8475531 · VAT Reg. No: GB 167 9240 79 

 

 

7  Warranty statement 

This product is warranted to be free from defects in material and workmanship for a 

period of one  (1) year  from date of purchase. The product will be duly repaired upon 
prompt notification in compliance with the following conditions: 

 

  This warranty is valid only if the product is used for its intended purpose and 

within the guidelines specified in this instruction manual. 

  This warranty does not cover damage caused by accident, neglect, misuse, 

improper service, natural forces or other causes not arising from defects in the 
original material or workmanship. 

  This warranty does not cover any incidental or consequential damages, 

commercial loss or other damages from the use of this product. 

  This warranty is invalidated by any non-factory modification, which will 

immediately terminate all liabilities on us for the products or damages caused 
by its use. The customer shall be responsible for the product or use of products, 
as well as any supervision required for safety. 

  If the product must be returned to the distributor, the customer is responsible 

for ensuring the product is suitably packed. The customer is also responsible 
for any shipping charges that may arise. 

  This warranty is only applicable to the original purchaser. 

  This warranty is only valid if it is registered with the supplier within 30 days 

from the purchase date. 

 
Some regions or states do not allow limitation on the length of implied warranties or 

the exclusion or limitation of incidental or consequential damages. This warranty gives 
you specific legal rights. This warranty is given expressly in lieu of all other warranties, 
expressed or implied. 

 
The purchaser agrees that there is no warranty of merchantability or of fitness for any 

intended purpose and that there are no other remedies or warranties, expressed or 
implied, which extend beyond the description on the face of the agreement. 

 
Products received without proper authorisation will not be entertained. All items 

returned for service should be sent by prepaid postage in the original packaging or other 
suitable carton. The package must be suitably padded to avoid damage in transit. We will 
not be responsible for damage caused by improper packaging. 

 

For Reference

Only

Summary of Contents for abx725008








Reviews: