ABB-Welcome
Operation
|
— 12 —
5.3
Round pushbutton with ID card reader
Programming
Function
Command
Indicated LED for door open
Create admin card
Swipe card 1x
Green
Enter settings
Swipe admin card 1x
Orange
The system will take the first card swiped after powering up the system within 60s to be the
admin card.
After enter settings, following functionalities can be implemented:
Function
Command
Indicated LED for door open
Enroll user
Swipe admin card 1x
Orange flash 1x
Swipe card (new user) 1x
Green
Delete user
Swipe admin card 2x
Orange flash 2x
Swipe card (user x) 1x
Green
Enroll new admin
Swipe admin card 3x
Orange flash 3x
Swipe card (new admin) 1x
Green
Delete admin
Swipe admin card 4x
Orange flash 4x
Swipe card (admin x) 1x
Green
Delete all users
Swipe admin card 5x
Orange flash quickly
Swipe admin card 1x
Green
During setting, please swipe the same admin card.
Function
Command
Indicated LED for door open
Exit settings
Swipe admin card 1x or no cards
swiped within 15 seconds
——
Open a door
Function
Command
Indicated LED for door open
Open a door
Swipe the enrolled keycard
Green
Reset to factory default
Function
Command
Indicated LED for door open
Reset to factory
default
Disconnect the power supply.
Set rotary switches of address to "0"
and set all the dip-switches to "OFF "
Reconnect the power supply
Long press the 1st button for 3s
Finish
——
——
——
Green
Red, green, orange cycle
——
