ABB TZIDC-210, Operating Instructions Manual

Page: 47 / 68

TZIDC-210, TZIDC-220 DIGITAL POSITIONER | OI/TZIDC-210/TZIDC-220-EN REV. G 47
Conductor cross-section
Basic device
Electrical connections
4 to 20 mA input Screw terminals max. 2.5 mm
2
(AWG14)
Options Screw terminals max. 1.0 mm
2
(AWG18)
Cross section
Rigid / flexible wires 0.14 to 2.5 mm
2
(AWG26 to AWG14)
Flexible with wire end
sleeve 0.25 to 2.5 mm
2
(AWG23 to AWG14)
Flexible with wire end
sleeve no plastic sleeve 0.25 to 1.5 mm 2 (AWG23 to AWG17)
Flexible with wire end
sleeve with plastic sleeve 0.14 to 0.75 mm
2
(AWG26 to AWG20)
Multi-wire connection capacity (two wire with the same cross-section)
Rigid / flexible wires 0.14 to 0.75 mm
2
(AWG26 to AWG20)
Flexible with wire end
sleeve no plastic sleeve 0.25 to 0.75 mm
2
(AWG23 to AWG20)
Flexible with wire end
sleeve with plastic sleeve 0.5 to 1.5 mm
2
(AWG21 to AWG17)
Option modules
Cross section
Rigid / flexible wires 0.14 to 1.5 mm
2
(AWG26 to AWG17)
Flexible with wire end
sleeve no plastic sleeve 0.25 to 1.5 mm
2
(AWG23 to AWG17)
Flexible with wire end
sleeve with plastic sleeve 0.25 to 1.5 mm
2
(AWG23 to AWG17)
Multi-wire connection capacity (two wire with the same cross-section)
Rigid / flexible wires 0.14 to 0.75 mm
2
(AWG26 to AWG20)
Flexible with wire end
sleeve no plastic sleeve 0.25 to 0.5 mm
2
(AWG23 to AWG22)
Flexible with wire end
sleeve with plastic sleeve 0.5 to 1 mm
2
(AWG21 to AWG18)
Feedback on the actuator position using proximity switches or
microswitches
Rigid wire 0.14 to 1.5 mm
2
(AWG26 to AWG17)
Flexible wire 0.14 to 1.0 mm
2
(AWG26 to AWG18)
Flexible with wire end
sleeve no plastic sleeve 0.25 to 0.5 mm 2 (AWG23 to AWG22)
Flexible with wire end
sleeve with plastic sleeve 0.25 to 0.5 mm
2
(AWG23 to AWG22)