40
“Operation and installation manual”
EN
5.3 Border covers
5.3.1 Remove the border covers
To access the fasten point between the EVSE and the floor is necessary to remove the Base cover
(11)
.
11
11
• Unscrew and remove the 8
fasteners of the base cover
(11)
on the rear side of the
EVSE.
• Remove the back base
cover.
• Remove the front base
cover by sliding it forward.
5.3.2 Install the border covers
11
11
• In order to install the base
covers
(11)
, repeat the
operations described in the
“Remove the border covers“
section in reverse order.