TA-5 14-S AFET Y AC500-S TRAINING CASE
PAGE
12/31
REV.
B
LANG.
en_US
DATE
2021/09/15
DOCUMENT ID.
3ADR025217M6801
—
7.
Getting started
Before you start, make sure following documents and the application program are available:
1.
3ADR025003M99*: “Regulations Concerning the Setting up of Installations AC500 Control Sys-
tem, AC500-S Safety PLC”
2.
3ADR025091M*: AC500-S Safety User Manual
3.
Exemplary Automation Builder project for TA514-SAFETY: TA514-SAFETY Training Case Project at
http://www.abb.com/PLC
NOTICE
To edit the provided application program for TA514-SAFETY, the following Software is
needed:
•
Automation Builder V1.1 (or higher)
See also “PS501-S License enabling package” for Safety: 3ADR025001M06* at
www.abb.com/PLC
and follow license guidelines for Automation Builder.
NOTICE
A modification of the safety application program generates a new project CRC version
number.
WARNING
The exemplary project is NOT intended to be used on real machines. It is for training
purposes only.
Programming Guidelines described in AC500-S Safety User Manual shall be followed.
Summary of Contents for TA514-SAFETY
Page 1: ... OPERATION MANUAL TA514 SAFETY AC500 S training case ...
Page 30: ......
