Configuration pages
83
Presentation format
– You can select a different presentation for a value on the
presentation pages.
• Default: Value is presented as it is configured in the Device template.
• Hexadecimal: Value is presented in hexadecimal form.
• Binary: Value is presented in binary form.
Presentation scaling
– You can add an additional scaling on the value before it is
presented on the web-page.
The value will be divided by the scale value before presented on the web page. It will
be multiplied with the scale value before value is written to the drive.
Picture
This option lets you choose a picture to be presented on the page. The picture must
not be more than 870 pixels wide and must be in gif, jpg or png-format. The picture
will be sent to the device when you press the ‘Upload’ button. To remove a picture
from the device, press the ‘Clear’ button.
Note:
There are maximum 800 kB available for pictures. On the Page configuration
section you can see how much space remains.
Page name
This field can be used to give the page a more descriptive name. Click the ‘
set as
start page
’ button if this page should be the first page to be presented when logging
into the module
It is also possible to change name on the Page menu (default Overview and
Advanced overview).
Summary of Contents for SREA-01
