manualshive.com logo in svg

ABB SIM600, Installation Manual, Page: 25 / 32

Share
Download
ABB SIM600 Installation Manual Download Page 25

Mounting Protection System Simulator SIM600

5.

Mounting of Protection System Simulator SIM600

5.1.

By using a suitable mounting kit, Protection System Simulator SIM600 can be flush-
mounted into a wall or a panel for example for demonstration purposes. The kit contains
four clamps and four screws.

The front panel of SIM600 is 224 mm wide and 266 mm high. The width of the cut-out
should be 213 mm and the height of the cut-out should be 253 mm. These dimensions
correspond to the dimensions of the SIM600 case. They do not include the data transmis-
sion cables that are connected to the side panels of SIM600. The size of these connectors
must be taken into account when mounting. To connect the SIM600 simulation cables
properly, leave an unobstructed space of 80-100 mm next to both side panels.

Do not use excessive force or bend the cables while mounting
SIM600.

SIM600 must be positioned so, that its power supply can be connected to a mains outlet,
and that the IEDs to which SIM600 is to be connected are within reach of the simulation
cables.

25

Protection System Simulator SIM600

1MRS756102

Installation Manual

Summary of Contents for SIM600

































Reviews:

No comments