1SDH002031A1002 ECN000092998 Rev. B
SACE Tmax XT2
– XT4 | 204
61 - Ekip Multimeter
Ekip Multimeter
is a module for remote viewing equipped with a touchscreen display that makes
it possible to view and change parameters of the Trip unit it is connected to via the local bus.
Up to four
Ekip Multimers
can be connected to the same Trip unit.
In contrast, the module can
be connected to only one Trip unit.
Electrical characteristics
The rear connector allows powering the unit with two different electrical solutions:
Terminals / supply voltage
Frequency
Power absorption
Inrush current
21.5...53 VDC
-
10 W max
2 A max for 20 ms
105...265 VAC/DC
45…66 Hz
10 VA/W max
2 A max for 20 ms
IMPORTANT: AC and DC power supplies cannot be present at the same time
The module offers an auxiliary voltage of 24 VDC (terminals 24Vout L+ and L-) that can be used
to directly supply the Trip unit.
CAUTION! Ekip Multimeter is sized to power only the Trip unit without additional
modules. If the auxiliary module voltage is used, it must be connected directly to
the CB terminal board, without the possibility of using Ekip Supply or other
modules
Connections
For the local bus and the auxiliary power supply, Belden 3105A or equivalent cables with a
maximum length of 15 m must be used. The cable shield must be grounded on both sides of the
connection.
Documentation
More information is available at http://www.abb.com/abblibrary/DownloadCenter/, in kit sheet
1SDH001000R0520.
62 - External neutral
It is a current sensor for the neutral pole outside the circuit breaker for CB 3P to establish
neutral protection by connecting to the Trip unit.
To configure the sensor presence and the protection see pages 29 e 44.
More information on the connection of the external neutral can be found at
http://www.abb.com/abblibrary/DownloadCenter/.
Summary of Contents for SACE Tmax XT2
