ABB | SACE Emax 2
6 | © 2018 ABB | 1SDH001316R0002 - ECN000086018 - Rev. C
Ekip Touch protection trip unit | 1 - Layout of the interface
Ekip Touch protection trip unit
1 - Layout of the interface
Components of the interface
The operator interface for the Ekip Touch trip units appears as follows:
L1
U12
528.9A
95.3V
U12
U31
L1
L2
L3
U23
Ne
03:55
A
B
C
D
E
F
G
Figure 2
The following table provides a description of the parts of the interface:
Pos. Description
A
Touchscreen display.
B
Power LED, green.
C
LED Warning, yellow.
D
LED Alarm, red.
E
The
HOME
key accesses the main page, or the
initial page
.
F
iTEST
key. If the main page or a level 2 page is displayed (see below), whenever you press on it
the following pages are displayed in succession:
•
List of Alarms
, if there are any messages.
•
Protection unit
, with information on Mainboard and trip unit.
•
Circuit-breaker
, with information on the circuit-breaker.
•
Last opening
, with information on the last opening.
If the
Trip Test
item has been selected in the
Test
menu, it will execute the opening command
when pressed and held for at least 7 seconds.
G
Test connector.
