manualshive.com logo in svg

ABB SACE Emax 2, Installation, Operation And Maintenance Instructions

Share
Download
ABB SACE Emax 2 Installation, Operation And Maintenance Instructions Download Page 91

ABB | SACE Emax 2

Ekip Touch protection release | 9 - Touch protections

87 | © 2013 

ABB |  

1SDH001000R0002 - L7804

Protection I

I

I3

t

I

Path

Main page - Menus - Protections

Function

The protection I protects against instantaneous short circuit.

When the activation threshold is exceeded, the protection trips within a fixed time. The user 
can set the activation threshold.

Parameters

The following is a description of the parameters:

Parameter

Description

Enabling

Activates/deactivates the protection.

 

IMPORTANT: it can be only activated if the MCR protection 

is Off. 

Threshold (I3)

It defines the current value that if exceeded activates the protection 
(in reference to the curve, it is the part of the curve parallel to the 
ordinate).
It is represented both as an absolute value (Ampere) and as a relative 
value (In, nominal value defined by the Rating Plug).

 

IMPORTANT: The I3 threshold set must be higher than the 

I2 threshold. An incorrect configuration returns an error on 
the display and the programming session doesn’t conclude, 
with consequent rejection of the changes made to the 
parameters.

 

Summary of Contents for SACE Emax 2
















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands