RMC-100 QUICK START GUIDE| 2107023MNAA-001
Figure 1: RMC-100
Additional information
Scan the code for more product publications:
RMC-100 home page
IMPORTANT NOTE:
For a COMM port to be activated (all pins
are active including VOUT and Sw VOUT), the COMM module
(part 2105236-001) must be in the slot for the appropriate
COMM port. The module’s communication protocol type is
software selectable. For RS-422 pinouts (not shown above), refer
to the RMC User Manual.
Figure 2: AO pinouts
Contact us
ABB Inc., Measurement & Analytics
Quotes:
Orders:
Training:
Support:
+1 800 442 3097 (opt. 2)
www.abb.com/upstream
ABB MEASUREMENT & ANALYTICS
RMC-100
Quick Start Guide
Measurement made easy
Safety and compliance information is included with the device
in the shipping packaging.
We reserve the right to make technical changes or modify the
contents of this document without prior notice. With regard to
purchase orders, the agreed particulars shall prevail. ABB does
not accept any responsibility whatsoever for potential errors or
possible lack of information in this document.
Copyright
©
2020 ABB all rights reserved
