manualshive.com logo in svg

ABB Relion SMU615, Technical Manual

Share
Download
ABB Relion SMU615 Technical Manual Download Page 162

is deactivated or at least during the drop-off time of 25 ms. The 

BLOCK

 signal can be

used to block the arc detection output 

ARC_FLT_DET

.

5.4.5

Application

The arc detection information from this function can be used in the standalone

devices, for an alarm or protection logic. Also this information can be also be

utilized in centralized solutions, for station-wide arc protection scheme. The arc

detection consists of:
• Optional arc light detection hardware with automatic backlight compensation

for lens type sensors

• Light signal output 

ARC_FLT_DET

 for routing indication of locally detected light

signal to the protection device

The light from an arc is detected locally, by lens sensors connected to inputs

Light sensor 1, Light sensor 2 or Light sensor 3 on the communication module

of the merging unit. The lens sensors can be placed, for instance, in the busbar

compartment, the breaker compartment and the cable compartment of the metal-

clad cubicle.
The light detected by the lens sensors is compared to an automatically adjusted

reference level. Inputs Light sensor 1, Light sensor 2 and Light sensor 3 have their

own reference levels. When the reference level of one of the inputs is exceeded, light

has been detected.
The light signal output from an arc detection stage ARC_FLT_DET is activated

immediately in the detection of light in all situations. A centralized arc protection

solution is realized by routing the light signal output to an output contact

connected to a binary input of the protection device, or by routing the light signal

output through the communication.

Cover unused inputs with dust caps.

5.4.6

Signals

5.4.6.1

ARCDSARC Input signals

Table 191: ARCDSARC Input signals

Name

Type

Default

Description

BLOCK

BOOLEAN

0=False

Block signal for all binary out-
puts

Supervision functions

1MRS758407 C

162

SMU615

Technical Manual

Summary of Contents for Relion SMU615

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands