Section 6
LHMI engineering
For information on LED operation modes supported by the protection
relay, see the technical manual.
6.1
Single-line diagram engineering
A single-line diagram of the protection relay can be designed by using the Graphical
Display Editor tool of PCM600. The single-line diagram is modelled according to the
IEC 61850 standard in the Graphical Display Editor.
6.1.1
Diagrams in Graphical Display Editor
The Graphical Display Editor is used for various tasks.
•
Creating HMI display raster layouts
•
Adding static text
•
Adding measurands
•
Adding busbars
•
Adding symbols onto display page
•
Drawing lines (creating a link)
•
Adding buttons to control ACT application with SPCGGIO
1MRS757810 C
Section 6
LHMI engineering
REC615 and RER615
91
Engineering Manual
