•
Right-click the
Plant Structure
view, point to
New
and select
Create
from Template
.
•
Right-click the
Plant Structure
view, point to
New
and select
General
and select the element either
IED Group
or
Substation
.
2.
On the
View
menu, select
Object Types
.
3.
Select the needed elements and drag them into the plant structure.
GUID-2848A9FA-0084-45F1-8C7C-C3E5FC679F25 V3 EN
Figure 18:
The start of a project with IEDs placed but not renamed
4.
Rename each level in the structure by the names/identifications used in the grid.
•
Right-click the level and select
Rename
.
•
Rename the levels in the
Object Properties
view.
4.3
Inserting an IED
The context menu or the
Object Types
view shows the available IEDs that can be
inserted, on the bay level, into the plant structure according to the installed
connectivity package.
It is possible to do various tasks in the plant structure.
•
Insert either offline or online IED
•
Import a template IED that is available in the template library as a .pcmt file
•
Import a preconfigured IED available as a .pcmi file
PCM600 uses two kinds of IED files: .pcmt and .pcmi. Both files
include the complete IED configuration but their usage differs.
The .pcmt files are always accessed through the PCM600 template
1MRS757810 C
Section 4
Setting up a project
REC615 and RER615
41
Engineering Manual
