ABB Relion SAM600-IO, Protocol Manual

Page: 71 / 108

7.7.1.8 Generic communication function for Measured Value MVGAPC
SEMOD55402-1 v3
PID-3779-LOGICALNODEDATA v2
LN type LN prefix LN class Function block name
MVGGIO (revision 1) MV GGIO MVGAPC
Table 24: MVGAPC Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter
Oper.origin.orCat CO - Mod Cmd Mode parameter
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter
for 61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter for 61850
q ST - Beh Mon Quality: Behaviour parameter for
61850
t ST - Beh Mon Timestamp: Behaviour parameter
for 61850
AnIn a_dMV rangeC.hhLim.f CF - MV hhLim - High High limit multiplied with the
base prefix (multiplication factor)
rangeC.hLim.f CF - MV hLim - High limit multiplied with the base
prefix (multiplication factor)
rangeC.lLim.f CF - MV lLim - Low limit multiplied with the base
prefix (multiplication factor)
rangeC.llLim.f CF - MV llLim - Low Low limit multiplied with the
base prefix (multiplication factor)
rangeC.max.f CF - MV max - Maximum value multiplied with
the base prefix (multiplication
factor)
rangeC.min.f CF - MV min - Minimum value multiplied with the
base prefix (multiplication factor)
mag.f MX - VALUE Mon Magnitude of deadband value
subMag.f SV - - - Substituted value
range MX - RANGE Mon Range
q MX - VALUE Mon Quality: Magnitude of deadband
value
Table continues on next page
1MRK 511 440-UEN A
Section 7
Logical node data model
Switchgear control unit SAM600-IO Version 2.2 IEC 65
Communication protocol manual