ABB Relion SAM600-IO, Protocol Manual

Page: 50 / 108

DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter
for 61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter
q ST - Beh Mon Quality: Behaviour parameter
t ST - Beh Mon Timestamp: Behaviour parameter
GrAlm a_dSPS stVal ST - ALARM Mon OR function betweeen inputs 1 to
16
q ST - ALARM Mon Quality: OR function betweeen
inputs 1 to 16
t ST - ALARM Mon Timestamp: OR function
betweeen inputs 1 to 16
7.4.1.2 Logic for group indication INDCALH
PID-6511-LOGICALNODEDATA v1
LN type LN prefix LN class Function block name
INDCALH (revision 1) IND CALH INDCALH
Table 7: INDCALH Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter
Oper.origin.orCat CO - Mod Cmd Mode parameter
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter
for 61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter
q ST - Beh Mon Quality: Behaviour parameter
t ST - Beh Mon Timestamp: Behaviour parameter
Table continues on next page
Section 7
1MRK 511 440-UEN A
Logical node data model
44 Switchgear control unit SAM600-IO Version 2.2 IEC
Communication protocol manual