11.6.12
Logic
Under the Logic function folder there is viewable data for trip logic (showing
number of poles that have tripped and trip signal information), event counter
values, Logic gate outputs, Logic SR memory output states and Logic timer set
output states are also shown here.
11.6.12.1
Boolean 16 to Integer conversion B16IFCVI, B16I
Main menu/Test/Function status/Logic/Bool16ToInt(FCVI)/B16IFCVI:x
Main menu/Test/Function status/Logic/Bool16ToInt/B16I:x
Displays the output data of the Bool16ToInt function.
11.6.12.2
Integer to Boolean 16 conversion IB16FCVB, IB16
Main menu/Test/Function status/Logic/IntToBool16(FCVB)/IB16FCVB:x
Main menu/Test/Function status/Logic/IntToBool16/IB16:x
Displays the output data of the IntToBool16 function.
11.6.12.3
Tripping logic SMPPTRC
Main menu/Test/Function status/Logic/TripLogic(PTRC94)/SMPPTRC:x
Displays available instances of the function SMPPTRC with some measurements
per instance. The output data from each measurement is boolean and indicates the
existence of various trip signals. For example, if the output from parameter TRL1
is one, this indicates that a trip signal from phase L1 has been generated.
11.6.12.4
Trip matrix logic TMAGGIO
Main menu/Test/Function status/Logic/TripMatrix(GGIO)/TMAGGIO:x
Displays available instances of the function TMAGGIO with some boolean output
values per instance. The output signals from this function block are typically
connected to other logic blocks or directly to IED output contacts.
11.6.12.5
Logic gate
Main menu/Test/Function status/Logic/LogicGate/GATE:x
Displays available instances of the gate output. The output data type is an integer
with a possible value from 0 to 255.
1MRK504114-UEN E
Section 11
Test the IED
95
Operator's manual
