ABB Relion RES670, Applications Manual

Page: 241 / 382

15.5 Logic for group indication INDCALH
15.5.1 Identification
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic for group indication INDCALH - -
15.5.1.1 Application
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
Group indication logic function INDCALH is used to route indication signals to
different LEDs and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the
indication signal to physical outputs according to the specific application needs.
15.5.1.2 Setting guidelines
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
Operation : On or Off
15.6 Configurable logic blocks
IP11009-1 v4
The configurable logic blocks are available in two categories:
• Configurable logic blocks that do not propagate the time stamp and the quality
of signals. They do not have the suffix QT at the end of their function block
name, for example, SRMEMORY. These logic blocks are also available as part
of an extension logic package with the same number of instances.
• Configurable logic blocks that propagate the time stamp and the quality of
signals. They have the suffix QT at the end of their function block name, for
example, SRMEMORYQT.
15.6.1 Application
GUID-F5D6F065-441B-4296-AC56-F4DC1F5487E3 v3
A set of standard logic blocks, like AND, OR etc, and timers are available for
adapting the IED configuration to the specific application needs. Additional logic
blocks that, beside the normal logical function, have the capability to propagate
timestamp and quality are also available. Those blocks have a designation
including the letters QT, like ANDQT, ORQT etc.
1MRK 511 407-UEN C
Section 15
Logic
Phasor measurement unit RES670 2.2 IEC 235
Application manual