ABB Relion REQ650, Applications Manual

Page: 257 / 340

OnDelay : Used to prevent output signals to be given for spurious inputs. Normally set
to 0 or a low value. Used only for ModeOutputx : Steady .
OffDelay : Defines a minimum on time for the outputs. When used for direct tripping
of circuit breaker(s) the off delay time shall be set to approximately 0.150 seconds in
order to obtain a satisfactory minimum duration of the trip pulse to the circuit breaker
trip coils. Used only for
ModeOutputx : Steady .
ModeOutputx : Defines if output signal
OUTPUTx
(where x=1-3) is Steady or Pulsed .
A steady signal follows the status of the input signals, with respect to OnDelay and
OffDelay . A pulsed signal will give a pulse once, when the
Outputx
rises from 0 to
1.
11.4 Configurable logic blocks
11.4.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
OR Function block OR - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Inverter function block INVERTER - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
PULSETIMER function block PULSETIMER - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Controllable gate function block GATE - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Exclusive OR function block XOR - -
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Logic loop delay function block LOOPDELAY - -
1MRK 505 291-UEN A
Section 11
Logic
251
Application manual