Name
Type
Description
HMICTR7
INTEGER
Bitmask output 7 to local remote LHMI input
HMICTR8
INTEGER
Bitmask output 8 to local remote LHMI input
HMICTR9
INTEGER
Bitmask output 9 to local remote LHMI input
HMICTR10
INTEGER
Bitmask output 10 to local remote LHMI input
HMICTR11
INTEGER
Bitmask output 11 to local remote LHMI input
HMICTR12
INTEGER
Bitmask output 12 to local remote LHMI input
14.3.5.3
Settings
Table 407:
LOCREM Non group settings (basic)
Name
Values (Range)
Unit
Step
Default
Description
ControlMode
Internal LR-switch
External LR-switch
-
-
Internal LR-switch
Control mode for internal/external LR-
switch
14.3.5.4
Operation principle
The function block Local remote (LOCREM) handles the signals coming from the
local/remote switch. The connections are seen in Figure
, where the inputs on
function block LOCREM are connected to binary inputs if an external switch is used.
When the local HMI is used, the inputs are not used. The switching between external
and local HMI source is done through the parameter
ControlMode
. The outputs from
the LOCREM function block control the output PSTO (Permitted Source To Operate)
on Bay control (QCBAY).
Section 14
1MRK502052-UEN B
Control
714
Technical manual
Summary of Contents for Relion REG670
