•
In the short cut menu, right click and select View report.
•
Click the View report button in the upper right corner of the auditing screen.
•
Double click a report record.
4.
Delete reports in one of the following ways:
•
In the short cut menu, right click and select Delete report.
•
Click the Delete report button in the upper right corner of the auditing screen.
•
Select a record with the mouse cursor then press the Delete key on the keyboard.
5.
Generate logs in one of the following ways:
•
In the short cut menu, right click and select Generate log.
•
Click the Generate log button.
Besides generating a report you can also generate a log file with the same information as
for the report. Open and see the details of the file in Notepad or MS Excel.
After a successful generation of the log, the system confirms with a message along with
the path of the log file.
7.8
Editing features in graph
GUID-B2784230-2355-4D4A-AAF0-34864C8D3190 v2
You can do the following operations on the graph during calibration, commissioning and
monitoring:
•
Zoom in
•
Zoom out
•
Cancel zoom
•
Enable X-zooming
•
Enable Y-zooming
1.
Zoom in one of the following ways:
•
Right click a graph and select Zoom in or Zoom out in the shortcut menu.
IEC11000051-1-en.vsd
GUID-3F080E48-8B77-48A0-8283-89511E1AE50B V1 EN-US
Figure 27: Zooming via the shortcut menu
•
Use the mouse to zoom in and select a part of the graph area.
1MRK 502 067-UEN B
Section 7
Calibrating injection based 100% stator earth fault protection
73
Commissioning manual
