brackets on either side of the IED to have semi-flush mounting. Check that
there is adequate space on the front of the unit for the semi-projection
portion of the unit.
GUID-E9598552-2B0B-4936-9C93-F4F668120119 V1 EN
Figure 5:
Moving the rack-mounting brackets
Check the allowed minimum bending radius from the optical cable
manufacturer.
4.3.3
Flush mounting or semi-flush mounting the IED
A mounting kit is needed, when flush mounting or semi-flush mounting the IED in a panel.
Section 4
1MRS240046-IB B
Mounting
16
REF615R
Installation Manual