parameters R1B and X1B are the resistance and reactance in the forward direction.
These parameters along with the others found here need to be given values. For
complete parameter data refer to the Technical reference manual (TRM).
9.3.11
Logic
9.3.11.1
Overview
Under Logic there are settings for Trip logic, Trip matrix, Logic gate, Logic SR
memory and Logic timer set. Under each of these function categories there are a
number of instances, each with a parameter set.
9.3.11.2
Tripping logic SMPPTRC
Main menu/Settings/Setting group N/Logic/TripLogic(PTRC,94)/TRP
Displays available instances of the trip logic function SMPPTRCwith some settable
parameters per instance. The settable parameters include operation, tripping order,
trip lockout and minimum duration of trip output signal.
9.3.11.3
Trip matrix logic TMAGGIO
Main menu/Settings/Setting group N/Logic/TripMatrix(GGIO)/TR
Displays available instances of the trip logic function TMAGGIO, each with
settable parameters for operation, selections, delay times, and pulse times.
9.3.11.4
LogicGate
Main menu/Settings/Setting group N/Logic/LogicGate/GT
Displays parameter settings for operation (On or Off).
9.3.11.5
LogicRSMemory_qt
Main menu/Settings/Setting group N/Logic/LogicRSMemory_qt
Displays setting parameters for operating mode of memory function.
9.3.11.6
LogicSRMemory
Main menu/Settings/Setting group N/Logic/LogicSRMemory/SM
Displays setting parameters for operating mode of memory function.
9.3.11.7
LogicSRMemory_qt
Main menu/Settings/Setting group N/Logic/LogicSRMemory_qt/
SRMEMORYQT:x
Section 9
1MRK 511 188-UEN C
Read and change settings
62
Operator's manual
