8.3
Authorizations
8.3.1
User authorization
The user categories have been predefined for the LHMI and WHMI, each with
different rights and default passwords.
Passwords are settable for all predefined user categories. The LHMI password must
be at least four and WHMI password at least nine characters. The maximum number
of characters is 8 for the LHMI password and 20 for the WHMI password. Only the
following characters are accepted.
•
Numbers 0-9
•
Letters a-z, A-Z
•
Space
•
Special characters !"#%&'()*+´-./:;<=>?@[\]^_`{|}~
User authorization is disabled by default and can be enabled via the
LHMI or WHMI path
Main Menu/Configuration/Authorization/
Passwords
.
Table 23:
Predefined user categories and default passwords
Username
LHMI
password
WHMI password User rights
VIEWER
0001
remote0001
Only allowed to view
OPERATOR
0002
remote0002
Authorized to make operations
ENGINEER
0003
remote0003
Allowed to change protection relay parameters,
but no operation rights
ADMINISTRATOR
0004
remote0004
Full access
For user authorization for PCM600, see PCM600 documentation.
Section 8
1MRS758754 B
Commissioning
116
REC615 and RER615
Operation Manual
