4.6.7
LMI LEDs
GUID-5A7BF4F1-CECB-44B8-8AE6-480382B545F0 v2
This dialog box contains the list of bay units and the central unit (LMI LED configuration). The
unit specific configuration dialog box (Status LED on LMI) is opened by selecting the desired
bay unit or central unit with the left mouse button and then clicking on Continue or directly by
simply double-clicking on the unit line.
12000118-IEC18000510-1-en.vsdx
IEC18000510 V1 EN-US
Figure 47: LMI LED configuration (List of units/ Print dialog box)
12000119-IEC18000511-1-en.vsdx
IEC18000511 V1 EN-US
Figure 48: Status LED on the LMI (LED Configuration dialog box)
Under the Status LED on LMI dialog box, the number of the LED on the LMI is given in the ID
column.
4.6.7.1
New signal
GUID-ECF1D0AC-8EB2-4673-9716-A59622A57235 v2
A LED is assigned to a signal by marking it in the dialog and clicking on New signal or
alternatively by double-clicking on the LED line. A list of possible signals is then presented to
Section 4
1MRK 500 132-UEN B
HMI500
54
Distributed busbar protection REB500
Operation manual
© Copyright 2019 ABB. All rights reserved
