ABB Relion 670 series, Technical Manual

Page: 1057 / 1432

Name Values (Range) Unit Step Default Description
ContTrCorr -0.010 - 0.010 s 0.001 0.005 Correction for time difference in auxiliary
and main contacts open time
OperTimeDelay 0.000 - 0.200 s 0.001 0.020 Time delay between change of status of
trip output and start of main contact
separation
tDGasPresAlm 0.00 - 60.00 s 0.01 0.10 Time delay for gas pressure alarm
tDGasPresLO 0.00 - 60.00 s 0.01 0.10 Time delay for gas pressure lockout
InitCounterVal 0 - 9999 - 1 0 Initial value for number of operations
InitAccCurrPwr 0.00 - 9999.99 - 0.01 0.00 Initial value for accum I^CurrExponent
integr over CB open travel time value
InitInactDays 0 - 9999 Day 1 0 Initial value for inactive days
InactiveAlHrs 0 - 23 Hour 1 0 Alarm time for inactive days counter in
hours
16.4.6 Monitored data
PID-3267-MONITOREDDATA v6
Table 768: SSCBR Monitored data
Name Type Values (Range) Unit Description
TTRVOP REAL - ms Travel time of the CB during opening
operation
TTRVCL REAL - ms Travel time of the CB during closing
operation
NOOPER INTEGER - - Number of CB operation cycle
CBLIFEPH INTEGER - - CB Remaining life of respective phase
INADAYS INTEGER - - The number of days CB has been inactive
IPOWPH REAL - - Accumulated I^CurrExponent integrated
over CB open travel time
SPCHT REAL - s The charging time of the CB spring
16.4.7 Operation principle
GUID-3902D69C-1858-40DD-AD63-C33C381697BA v11
The breaker monitoring function includes metering and monitoring subfunctions. The
subfunctions can be enabled and disabled with the
Operation setting. The corresponding
parameter values are
Enabled and Disabled.
The operation of the subfunctions is described by the module diagram as shown in Figure 544 . All
the modules in the diagram are explained in subsequent sections.
1MRK 502 066-UUS B Section 16
Monitoring
1051
Technical manual