ABB Relion 670 series, Manual, Page: 127 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
Mod aINC
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh aINS stVal ST - Beh Mon Behaviour parameter
q ST - Beh Mon Quality: Behaviour parameter
t ST - Beh Mon Timestamp: Behaviour parameter
StrNDir v1SPS stVal ST - STND Mon Non-directional start, issued from
any phase or loop
q ST - STND Mon Quality: Non-directional start,
issued from any phase or loop
t ST - STND Mon Timestamp: Non-directional start,
issued from any phase or loop
7.5.3.5 Distance protection zone, quadrilateral characteristic ZMQAPDIS
LN type LN prefix LN class Function block name
ZMQAPDIS (revision 0) ZMQA PDIS ZMQAPDIS
Table 27: ZMQAPDIS Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Str aACD general ST - START Mon General Start, issued from any
phase or loop
dirGeneral ST - - Mon Integer coded info about general
direction of fault
phsA ST - STL1 Mon Start signal from phase L1
phsB ST - STL2 Mon Start signal from phase L2
phsC ST - STL3 Mon Start signal from phase L3
q ST - START Mon Quality: General Start, issued from
any phase or loop
t ST - START Mon Timestamp: General Start, issued
from any phase or loop
Op aACT general ST T TRIP Mon General Trip, issued from any
phase or loop
phsA ST T TRL1 Mon Trip signal from phase L1
Table continues on next page
1MRK 511 349-UEN -
Section 7
Logical node data model
670 series 2.1 IEC 121
Communication protocol manual