ABB Relion 670 series, Manual, Page: 104 / 366

DO name DO type DA name FC T Signal Mon/C
md
Description
OpnCTAlm v1SPS
t ST - OPENCTAL Mon Timestamp: Open CT Alarm
output signal. Issued after a
delay ...
DifANS v2MV mag.f MX - IDNSMAG Mon Negative Sequence Differential
current; in primary Amperes
q MX - IDNSMAG Mon Quality: Negative Sequence
Differential current; in primary
Amperes
t MX - IDNSMAG Mon Timestamp: Negative Sequence
Differential current; in primary
Amperes
RstMaxA v2MV mag.f MX - IBIAS Mon Magnitude of the common Bias
current; in primary Amperes
q MX - IBIAS Mon Quality: Magnitude of the common
Bias current; in primary Amperes
t MX - IBIAS Mon Timestamp: Magnitude of the
common Bias current; in primary
Amperes
7.5.1.5 1Ph High impedance differential protection HZPDIF
LN type LN prefix LN class Function block name
HZPDIF (revision 2) HZ PDIF HZPDIF
Table 15: HZPDIF Logical node data
DO name DO type DA name FC T Signal Mon/C
md
Description
Mod a_dINC Oper.ctlVal CO - Mod Cmd Mode parameter
Oper.origin.orCat CO - Mod Cmd Mode parameter
Oper.origin.orIdent CO - Mod Cmd Mode parameter
Oper.ctlNum CO - Mod Cmd Mode parameter
Oper.T CO - Mod Cmd Mode parameter
Oper.Test CO - Mod Cmd Mode parameter
Oper.Check CO - Mod Cmd Mode parameter
stVal ST - - Mon Mode status parameter for 61850
q ST - - Mon Quality: Mode status parameter for
61850
t ST - - Mon Timestamp: Mode status
parameter for 61850
Beh a_dINS stVal ST - Beh Mon Behaviour parameter
q ST - Beh Mon Quality: Behaviour parameter
t ST - Beh Mon Timestamp: Behaviour parameter
Alm a_dSPS stVal ST - ALARM Mon Alarm signal
Table continues on next page
Section 7
1MRK 511 349-UEN -
Logical node data model
98 670 series 2.1 IEC
Communication protocol manual