ABB Relion 670 series, Technical Manual

Page: 1180 / 1432

Name Values (Range) Unit Step Default Description
TypNo8 Absolute
Relative
- - Absolute Type identification (TYP)
GiNo1 Excluded
Included
- - Included Response and status change (GI)
GiNo2 Excluded
Included
- - Included Response and status change (GI)
GiNo3 Excluded
Included
- - Included Response and status change (GI)
GiNo4 Excluded
Included
- - Included Response and status change (GI)
GiNo5 Excluded
Included
- - Included Response and status change (GI)
GiNo6 Excluded
Included
- - Included Response and status change (GI)
GiNo7 Excluded
Included
- - Included Response and status change (GI)
GiNo8 Excluded
Included
- - Included Response and status change (GI)
GUID-86DE9DBA-BE2F-4CC9-B447-1D2D86849EFF v1
The FunctionType parameter associates a particular instance of the function block with a FUN.
Refer to the IEC60870-5-103 standard for details.
The InfNo
n parameters are used to associate each individual input signal with a userdefined INF.
Refer to the IEC60870-5-103 standard for details.
The TypNo n parameters determine if messages use absolute or relative time. This adheres to the
TYPE IDENTIFICATION (TYP) message types 1 (time-tagged message) and 2 (time-tagged message
with relative time) of the IEC60870-5-103 standard.
The GiNo
n parameters determine whether a message is sent as a part of a GI reply or not. Refer to
the IEC60870-5-103 standard for details.
18.8.10 Function commands for IEC 60870-5-103 I103CMD
18.8.10.1 Functionality
GUID-973929FE-292B-42A5-ACF9-BC95E2B16AE1 v2
I103CMD is a command function block in control direction with pre-defined output signals. The
signals are in steady state, not pulsed, and stored in the IED in case of restart.
18.8.10.2 Identification
GUID-CFD43980-0791-40D1-9136-CF4CCC35549A v1
Function description Function block
name
IEC 60617
identification
ANSI/IEEE C37.2
device number
Function commands for IEC
60870-5-103
I103CMD - -
Section 18 1MRK 502 066-UUS B
Station communication
1174
Technical manual