ABB Relion 670 series, Technical Manual

Page: 1146 / 1432

en05000720.vsd
IEC05000720 V1 EN-US
Figure 591: The download configuration window in LNT
Communication ports
M15083-97 v3
The serial communication module (SLM) is a mezzanine module placed on the Main Processing
Module (NUM) and is used for LON, SPA, IEC60870-5-103 and DNP communication.
There are two types of IO connectors: 1) snap-in for plastic fiber cables, and 2) ST/bayonet for
glass fiber cables. The SLM can be equipped with either type or a combination of both, which is
identified by a tag.
Connect the incoming optical fiber to the RX receiver input, and the outgoing optical fiber to the
TX transmitter output. Pay special attention to the instructions concerning handling and
connection of fiber cables.
SEMOD116913-2 v2
Table 851: SPA addresses for commands from the operator workplace to the IED for apparatus control
Name Function
block
SPA
address
Description
BL_CMD SCSWI01 1 I 5115 SPA parameters for block
command
BL_CMD SCSWI02 1 I 5139 SPA parameters for block
command
BL_CMD SCSWI02 1 I 5161 SPA parameters for block
command
BL_CMD SCSWI04 1 I 5186 SPA parameters for block
command
BL_CMD SCSWI05 1 I 5210 SPA parameters for block
command
BL_CMD SCSWI06 1 I 5234 SPA parameters for block
command
BL_CMD SCSWI07 1 I 5258 SPA parameters for block
command
Table continues on next page
Section 18 1MRK 502 066-UUS B
Station communication
1140
Technical manual