ABB Relion 670 Series RES670, Technical Manual

Page: 659 / 888

18.7.9.4 Signals
Table 521: I103USRDEF Input signals
Name Type Default Description
BLOCK BOOLEAN 0 Block of status reporting
INPUT1 BOOLEAN 0 Binary signal Input 1
INPUT2 BOOLEAN 0 Binary signal input 2
INPUT3 BOOLEAN 0 Binary signal input 3
INPUT4 BOOLEAN 0 Binary signal input 4
INPUT5 BOOLEAN 0 Binary signal input 5
INPUT6 BOOLEAN 0 Binary signal input 6
INPUT7 BOOLEAN 0 Binary signal input 7
INPUT8 BOOLEAN 0 Binary signal input 8
RT_START BOOLEAN 0 Trig to set base of relative time
RT_START registers the positive transition (0->1) of a pulse and sets the time from
which relative time is derived. Relative time is assigned only to inputs where the
corresponding
TypNo parameter is set to Relative . The maximum relative time and unit
conform to the IEC60870-5-103 standard.
18.7.9.5 Settings
Table 522: I103USRDEF Non group settings (basic)
Name Values (Range) Unit Step Default Description
FunctionType 1 - 255 - 1 5 Function type (1-255)
InfNo1 1 - 255 - 1 1 Information number for binary input 1 (1-255)
InfNo2 1 - 255 - 1 2 Information number for binary input 2 (1-255)
InfNo3 1 - 255 - 1 3 Information number for binary input 3 (1-255)
InfNo4 1 - 255 - 1 4 Information number for binary input 4 (1-255)
InfNo5 1 - 255 - 1 5 Information number for binary input 5 (1-255)
InfNo6 1 - 255 - 1 6 Information number for binary input 6 (1-255)
InfNo7 1 - 255 - 1 7 Information number for binary input 7 (1-255)
InfNo8 1 - 255 - 1 8 Information number for binary input 8 (1-255)
TypNo1 Absolute
Relative
- - Absolute Type identification (TYP)
TypNo2 Absolute
Relative
- - Absolute Type identification (TYP)
TypNo3 Absolute
Relative
- - Absolute Type identification (TYP)
Table continues on next page
1MRK 511 365-UUS A
Section 18
Station communication
Phasor measurement unit RES670 2.1 ANSI 653
Technical manual