ABB Relion 670 Series RES670, Technical Manual

Page: 449 / 888

15.7.2 Single point indication related signals combining function block
INDCOMBSPQT
The value of single point input (SP_IN) is copied to the value part of the SP_OUT output.
The TIME input is copied to the time part of the SP_OUT output. State input bits are
copied to the corresponding state part of the SP_OUT output. If the state or value on the
SP_OUT output changes, the Event bit in the state part is toggled.
INDCOMBSPQT can propagate the quality, the value and the time stamps of the signals
via IEC61850.
15.7.2.1 Function block
INDCOMBSPQT
SP_IN*
TIME*
BLOCKED*
SUBST*
INVALID*
TEST* SP_OUT
IEC15000146.vsd
IEC15000146 V1 EN
Figure 160: INDCOMBSPQT function block
15.7.2.2 Signals
Table 309: INDCOMBSPQT Input signals
Name Type Default Description
SP_IN BOOLEAN 0 Single point indication
TIME GROUP
SIGNAL
0 Timestamp
BLOCKED BOOLEAN 0 Blocked for update
SUBST BOOLEAN 0 Substituted
INVALID BOOLEAN 0 Invalid value
TEST BOOLEAN 0 Testmode
Table 310: INDCOMBSPQT Output signals
Name Type Description
SP_OUT BOOLEAN Single point indication
1MRK 511 365-UUS A
Section 15
Logic
Phasor measurement unit RES670 2.1 ANSI 443
Technical manual