ABB RELION 650 SERIES, Technical Manual

Page: 821 / 942

If the IED is restarted while set to IED TESTMODE by a binary
input all functions will be temporarily unblocked during startup,
which might cause unwanted operations.
The TESTMODE function block might be used to automatically block functions
when a test handle is inserted in a test switch. A contact in the test switch (RTXP24
contact 29-30) can supply a binary input which in turn is configured to the
TESTMODE function block.
Each of the functions includes the blocking from the TESTMODE function block.
The functions can also be blocked from sending events over IEC 61850 station bus
to prevent filling station and SCADA databases with test events, for example
during a commissioning or maintenance test.
19.4 IED identifiers TERMINALID
IP15060-1 v2
19.4.1 Functionality
M15324-3 v6
IED identifiers (TERMINALID) function allows the user to identify the individual
IED in the system, not only in the substation, but in a whole region or a country.
Use only characters A-Z, a-z and 0-9 in station, object and unit
names.
19.4.2 Settings
GUID-3C49A222-FFE4-492B-A96C-9E9965FA2CB4 v2
PID-6801-SETTINGS v1
Table 608: TERMINALID Non group settings (basic)
Name Values (Range) Unit Step Default Description
StationName 0 - 18 - 1 Station name Station name
StationNumber 0 - 99999 - 1 0 Station number
ObjectName 0 - 18 - 1 Object name Object name
ObjectNumber 0 - 99999 - 1 0 Object number
UnitName 0 - 18 - 1 Unit name Unit name
UnitNumber 0 - 99999 - 1 0 Unit number
IEDMainFunType 0 - 255 - 1 0 IED main function type for
IEC60870-5-103
TechnicalKey 0 - 16 - 1 AA0B0Q0A0 Technical key (part 1)
0 - 16 - 1 Technical key (part 2)
0 - 16 - 1 Technical key (part 3)
0 - 16 - 1 Technical key (part 4)
1MRK 506 382-UEN A
Section 19
Basic IED functions
Line distance protection REL650 2.2 IEC 815
Technical manual