The application manual contains application descriptions and setting guidelines sorted per
function. The manual can be used to find out when and for what purpose a typical protection
function can be used. The manual can also provide assistance for calculating settings.
The technical manual contains operation principle descriptions, and lists function blocks, logic
diagrams, input and output signals, setting parameters and technical data, sorted per
function. The manual can be used as a technical reference during the engineering phase,
installation and commissioning phase, and during normal service.
The communication protocol manual describes the communication protocols supported by
the IED. The manual concentrates on the vendor-specific implementations.
The point list manual describes the outlook and properties of the data points specific to the
IED. The manual should be used in conjunction with the corresponding communication
protocol manual.
The cyber security deployment guideline describes the process for handling cyber security
when communicating with the IED. Certification, Authorization with role based access control,
and product engineering for cyber security related events are described and sorted by
function. The guideline can be used as a technical reference during the engineering phase,
installation and commissioning phase, and during normal service.
1.3.2
Document revision history
GUID-BD82A13A-6FA0-4E33-BDBF-23B5A0CF968F v1
Document
revision
Date
Product revision
History
-
2017–05
2.2.0
First release for product version 2.2
A
2017-10
2.2.1
Ethernet ports with RJ45 connector added.
enhancements/updates made to GENPDIF, ZMFPDIS and
ZMFCPDIS.
B
2018-03
2.2.1
Document enhancements and corrections
C
2019-0
5
2.2.1
PTP enhancements and corrections
1.3.3
Related documents
GUID-94E8A5CA-BE1B-45AF-81E7-5A41D34EE112 v7
Documents related to REQ650
Document numbers
Application manual
1MRK 505 383-UEN
Commissioning manual
1MRK 505 385-UEN
Product guide
1MRK 505 386-BEN
Technical manual
1MRK 505 384-UEN
Type test certificate
1MRK 505 386-TEN
650 series manuals
Document numbers
Operation manual
1MRK 500 128-UEN
Engineering manual
1MRK 511 420-UEN
Installation manual
1MRK 514 027-UEN
Communication protocol manual, DNP3
1MRK 511 413-UUS
Communication protocol manual, IEC 60870-5-103
1MRK 511 416-UEN
Communication protocol manual, IEC 61850 Edition 1
1MRK 511 414-UEN
Communication protocol manual, IEC 61850 Edition 2
1MRK 511 415-UEN
Table continues on next page
1MRK 505 385-UEN C
Section 1
Introduction
Breaker protection REQ650
9
Commissioning manual
© Copyright 2017 ABB. All rights reserved