manualshive.com logo in svg

ABB REJ 523, Technical Reference Manual, Page: 26 / 68

Share
Download
ABB REJ 523 Technical Reference Manual Download Page 26

REJ 523

Technical Reference Manual

ABB Substation Automation

Products and Systems

MRS750940-MUM

26

Table 4.1.3.3-3  SGF2

Switch

Function

Default
setting

SGF2/1

Automatic doubling of the start current of stage I>>.

When the switch is in position 1, the set value for the
stage is automatically doubled at start-up.

0

SGF2/2

Inverse-time operation of stage I> inhibited by the starting
of stage I>>.

When the switch is in position 1, the inverse-time
operation is inhibited.

0

SGF2/3

Inhibition of the operation of stage I>>.

When the switch is in position 1, the operation of stage
I>> is inhibited.

0

SGF2/4

Operation mode of the start indicator of stage I>.

When the switch is in position 0, the start indicator
automatically resets once the fault disappears.

0

SGF2/5

Operation mode of the start indicator of stage I>>.

When the switch is in position 0, the start indicator
automatically resets once the fault disappears.

0

SGF2/6

Not in use.

0

SGF2/7

Not in use.

0

SGF2/8

Not in use.

0

Σ

 SGF2

0

Summary of Contents for REJ 523





































































Reviews:

No comments