ABB REC650 ANSI, Applications Manual, Page: 301 / 370

12.7 Disturbance report
12.7.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Disturbance report DRPRDRE - -
Analog input signals A1RADR - -
Analog input signals A2RADR - -
Analog input signals A3RADR - -
Analog input signals A4RADR - -
Binary input signals B1RBDR - -
Binary input signals B2RBDR - -
Binary input signals B3RBDR - -
Binary input signals B4RBDR - -
Binary input signals B5RBDR - -
Binary input signals B6RBDR - -
12.7.2 Application
To get fast, complete and reliable information about disturbances in the primary and/or in
the secondary system it is very important to gather information on fault currents, voltages
and events. It is also important having a continuous event-logging to be able to monitor in
an overview perspective. These tasks are accomplished by the disturbance report function
DRPRDRE and facilitate a better understanding of the power system behavior and related
primary and secondary equipment during and after a disturbance. An analysis of the
recorded data provides valuable information that can be used to explain a disturbance,
basis for change of IED setting plan, improve existing equipment, and so on. This
information can also be used in a longer perspective when planning for and designing new
installations, that is, a disturbance recording could be a part of Functional Analysis (FA).
Disturbance report DRPRDRE, always included in the IED, acquires sampled data of all
selected analog and binary signals connected to the function blocks that is,
• maximum 30 external analog signals,
• 10 internal derived analog signals, and
• 96 binary signals.
Disturbance report function is a common name for several functions that is, Indications,
Event recorder, Sequential of events, Trip value recorder, Disturbance recorder.
1MRK 511 286-UUS A
Section 12
Monitoring
295
Application manual