ABB PRO-33.0-TL Series, Service Manual

Page: 63 / 122

Parameters 63
151.07 Timeout mode ( Visible only when parameter 151.01 FBA type is
FSCA-01. )
Selects the Modbus register access type to reset
the timeout counter. See parameter
151.06 .
None
None Modbus timeout feature is disabled.
Communication status in parameter
151.31
remains in On-line state.
0
Any message Timeout counter is reset when any Modbus
register is accessed. 1
Ctrl write Timeout counter is reset when the control word
register or reference register REF1/REF2 are
written to.
For more information, see
FSCA-01 manual .
2
151.08 IP address 4 ( Visible only when parameter 151.01 FBA type is
FENA-11/-21. )
Fourth octet of FENA IP address (0…255)
0
151.08 OK messages ( Visible only when parameter 151.01 FBA type is
FSCA-01. )
Shows the number of valid messages that the
inverter has received.
0
0…65535 Number of valid messages
151.09 Subnet CIDR ( Visible only when parameter 151.01 FBA type is
FENA-11/-21. )
Subnet masks are used for splitting networks into
subnets. A subnet mask is a 32-bit binary number
that is used to split the IP address into a network
address and a host address. Here, the subnet
mask is represented by its CIDR notation, as
shown in the table below.
0
31 255.255.255.254 31
30 255.255.255.252 30
29 255.255.255.248 29
28 255.255.255.240 28
27 255.255.255.224 27
26 255.255.255.192 26
25 255.255.255.128 25
24 255.255.255.0 24
23 255.255.254.0 23
22 255.255.252.0 22
21 255.255.248.0 21
20 255.255.240.0 20
19 255.255.224.0 19
18 255.255.192.0 18
17 255.255.128.0 17
16 255.255.0.0 16
15 255.254.0.0 15
14 255.252.0.0 14
13 255.248.0.0 13
12 255.240.0.0 12
11 255.224.0.0 11
No. Name/Value/Range Description Default
FbEq (16b/32b)