ABB Power2 850-M16, Operation Manual

Page: 173 / 178

Operation Manual / Power2 850-M / 4.2 High-pressure stage
6 Spare parts / 6.1 Ordering spare parts
© Copyright 2017 ABB. All rights reserved. HZTL4063_EN Revision A August 2017
6 Spare parts
6.1 Ordering spare parts
CAUTION
Spare part storage
All spare parts that were ordered together with the low-pressure and/or
high-pressure stage must be kept intact and ready for use.
u
Carefully clean any rusted parts and grease them.
Please quote the following data when making queries and ordering spare parts:
¡
Serial number of Power2 (HT……)
¡
Serial number of the low or high-pressure stage (PT……)
¡
Designation and part number.
Spare parts can be ordered from an ABB Turbocharging Service Station.
u
If different model variants are not taken into account in this document, contact an ABB
Turbocharging Service Station.
u
Dispose of placed and unusable parts in an environmentally-friendly and professional
manner in accordance with the local regulations.
u
Dispose of the packaging of new parts in an environmentally-friendly and professional
manner in accordance with the local regulations.
Required customer spare part set (97070) for a high-pressure stage
For the operations described in the Operation Manual, the customer spare part set (97070)
is required. These parts are only available in the complete set.
Part number Designation Quantity
42010 O-ring 1
42012 / 77040 O-ring 2
42017 O-ring 2
42018 O-ring 4
42099 Socket screw 8
56017 Hexalobular-head screw 3
61090 / 72004 Hex nut 6
64001 Lamellar ring 2
72003 Washer 3
Table 16: Customer spare part set (97070)
Page
31
/
35