ABB PickMaster Twin - PowerPac Applications Manual Download

Page: 68 / 454

3.5 Status view

Status

When the system starts, the status of the controller and the Runtime will show up
on the right top corner as the illustration.

xx1800001410

Note

Description

xx1800001745

Red

: There is at least one controller stopped.

Green

: All controllers are started and auto-

running.

Yellow

: There is at least one controller star-

ted and under manual controlling or just
connected.

Controllers

Grey

: No controller is added in the existing

solution.

Note

The

Red

has the highest priority.

Click on the

Control-

lers

button , the de-

tailed status for each
controller will show
up.

xx1800001746

Red

: Controller is stopped

Green

: Controller is started and auto-running.

Yellow

: Controller is started and under

manual controlling or just connected.

Controller

Grey

: No solution is opened.

Runtime

Red

: The connection to the virtual Runtime

fails.

VRT

Green

: The connection to the virtual Runtime

successes.

Yellow

: The connection to the virtual Runtime

is progressing.

Red

: The connection to the real Runtime fails.

RRT

Green

:The connection to the real Runtime

successes.

Yellow

: The connection to the real Runtime

is progressing.

The using language of the system.

English

Allows you to open the PickMaster PowerPac
application manual.

xx2000000307

Application manual - PickMaster® Twin - PowerPac

3HAC064218-001 Revision: B

3 Navigating PickMaster PowerPac

3.5 Status view

Summary of Contents for PickMaster Twin - PowerPac







































































































































































































































































































































































































































































Search results

Summary of Contents for PickMaster Twin - PowerPac

Reviews:

Related manuals for PickMaster Twin - PowerPac

Brands by name

Popular brands

ABB PickMaster Twin - PowerPac, Applications Manual

Search results

Summary of Contents for PickMaster Twin - PowerPac

Reviews:

Related manuals for PickMaster Twin - PowerPac

Brands by name

Popular brands